Azden WHD-PRO+i Wireless Mic System DSLR|Smartphones

Item Code: WHD-PRO-i
$350.00
$280.00
Please enter a quantity.

Azden WHD-PRO+i Wireless Mic System DSLR | Smartphones

The Azden WHD-PRO+i Wireless Mic System for DSLRs now works with smartphones and tablets with included interface cable for TRRS jacks.

Features

  • WL/T-PRO Body Pack Transmitter w/ belt clip, Single Channel with (2) Selectable Frequencies (169.445MHz and 170.245MHz).
  • WR-PRO Receiver with camera shoe mount and hard wired 3.5mm mono microphone output cable.
  • SGM-990 Shotgun Mic 6" with switchable Long and Short pickup patterns - 20-40ft. Uses (1) AAA battery.
  • EX-503 electret condenser omni-directional lavalier microphone.

Includes

  • WR-PRO VHF Receiver
  • WL/T-PRO VHF transmitter/lapel mic
  • SGM-990 shotgun microphone
  • Adapter cable for mobile devices
  • Shoe mounts for receiver and mic
  • Hook & Loop Mounting Tape
  • Ear Phone Monitor
  • Hard shell carry case
  • Manual

Specs WL/T-PRO

  • TRANSMISSION FREQUENCY: F1: 169.445MHz; F2: 170.245MHz
  • ANTENNA: Internal Antenna
  • MIC UNIT: Uni Dynamic
  • BATTERY: 1.5V (AA) x 1 (not included)
  • POWER CONSUMPTION: 100mA
  • RF OUTPUT: 10mW
  • IMPEDANCE: 8 k ohms
  • BATTERY LIFE: 8 to 10 Hours
  • DIMENSIONS: 62mm (Ø) x 211 mm – (2.4″ x 8.3″)
  • WEIGHT (including battery): 170g (6.0 oz)

Specs WR-PRO

  • Reception Frequency: F1: 169.445MHz; F2: 170.245MHz
  • Receiver type: Double superheterodyne
  • Sensitivity: 2mV @ S/N of 40dB
  • Battery: 1-9V Alkaline
  • Power consumption: 25mA
  • Monitor output: 1V @ 30W, Modulation frequency: 1kHz, Deviation: +/-7kHz
  • Mic output: 8mV w/10KW load, Modulation frequency: 1kHz, Deviation: +/-7kHz
  • Mic output impedance: 300Ω
  • Dimensions: 86(h) x 60(w) x 21.5(d) mm (3.3” x 2.4” x 0.85”)
  • Weight w/battery: 128g (4.5oz)

Specs SGM-990

  • Mic Element: Electret condenser
  • Frequency Response: 150-18KHz
  • Sensitivity: Long: 55dB / Short: 72dB (at 1kHz 1V/µ bar)
  • Directional Pattern: switchable long (super-cardioid) & short (cardioid)
  • Output Impedance Long: 1.7k Ohms / Short: 660 Ohms (at 1kHz)
  • Power Source: 1.5V DC (“AAA” Battery)
  • Max. SPL: 100dB
  • Signal to Noise: Better than 40dB
  • Plug Cord Assembly: Coiled cord with 3.5mm plug
Menu
Contact Us