ProLights ArenaCOB 4 Cell, Full Color RGBW LED Blinder

ProLights ArenaCOB 4 Cell, Full Color RGBW LED Blinder, IP65, TRUE1, 5-pin In/Out

ARENACOB4FC is a full colour LED replacement for a traditional 4 cell DWE blinder. Each of the individually controllable 75W RGBW cells deliver a consistent, powerful punch that has been designed to perform in even the largest environments.

Features:

• Four powerful RGBW LED cells with sizing and spacing matching traditional linear blinders
• Individual cell control for effects and amber shift for tungsten emulation
• IP65 housing for the most demanding environments with a virtually limitless 'building block' rigging system

Light Source

• Source: 4x75W RGBW LED
• Luminous flux: (24°) 5393 lm, (40°) 6260lm
• Lux: (24°) 2413lux @3m full
• Lux: (40°) 891lux @3m full
• Source life expectancy: >50.000 h

Optics

• Beam angle: (inc) 24° - (opt) 40°
• Field angle: 46°
• Pixel pitch: 150mm / 5.91''
• Lens diameter: 100mm / 3.94''
• Lens type: dichroic parabolic reflector in combination with HD fresnel lens
• Additional optics: 40°(opt), 32° without magnetic lens
• Other: Magnetic replacement of front lens

Colour System

• Colour mixing: RGBW/FC
• CTC: CTC control through independent DMX channel
• White presets: 2000~8000K
• Colour wheel: virtual colour wheel with presets

Dynamic Effects

• Pixel patterns: pre-programmed dynamic and static patterns
• FX generator: adjustable foreground/background colour, index, speed, direction
• Static colour mode: selection of static colour
• Manual colour mode: manual adjustment of colour
• Auto mode: built-in programs with execution speed adjustment
• Special features: Halo DWE dimming and amber-shift simulation

Body

• Hardware on-board: on board mechanics for modular assembly of multiple fixtures
• Body: sturdy die-cast aluminium body conceived for long-time durability
• Body colour: black

Control

• Protocols: DMX512, RDM
• DMX channels: HALO 1/4ch - STD 4/6/15ch - EXT16/21/27channel
• Pixel control: pixel2pixel control
• RDM: RDM ready for fixture remote monitor and settings
• Display: black OLED touch display
• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
• Master/Slave: for synchronized operation of more units linked in a chain

Electronics

• Dimmer: linear 0~100% electronic dimmer
• Dimmer curves: 4 different dimming curves available
• Strobe / shutter: 1-28 Hz, electronic
• Battery backup: battery backup for user operation without connecting to the main power
• Operating temperature: -20° ~ +45°
• Flicker: flicker free operation

Electrical

• Power supply: 100-240V – 50/60Hz
• Power consumption (at 230V): 227W
• Power consumption (at 120V): 230W
• Output (at 230V): 16 units on a single power line
• Output (at 120V): 8 units on a single power line

Physical

• Cooling: natural cooling of the peculiar chassis and to absence of fans
• Sospension and fixing: hanging bracket suitable for safe hanging and
• positioning
• Signal connection: IP DMX 5p IN/OUT, IP Art-Net Neutrik IN/OUT
• Power connection: IN/OUT Neutrik TRUECON
• IP rating: 65 for temporary outdoor application, not for fixed installation
• Dimensions (WxHxD): 619x167x264mm / 24.37''x6.57''x10.39''
• Weight: 8kg / 17.64lbs